Fender Stratocaster Guitar Forum - View Single Post - Wilkinson Vibrato stud screw size

		Fender Stratocaster Guitar Forum
Forum

Notices

Unregistered... click here to learn how you can win a FREE Squier CV '60's Strat!

Thread: Wilkinson Vibrato stud screw size

View Single Post

July 24th, 2008, 01:09 PM	#1 (permalink)
banjo-guy New Member! Join Date: Oct 2006 Posts: 1	Wilkinson Vibrato stud screw size I have a Wilkinson Vibrato.The studs that hold the unit in place seem smaller than would be used with the recommended 3/8 ths hole size. When I drilled a test hole in some scrap wood the stud was very loose in the hole. I then drilled a 5/16 hole and it was way to big. Is there a metric stud on this unit that I don't know about? If anyone has info that would help I would appreciate it

Untitled Document

» Strat-Talk Photos

Lapelcelery
Dream Guitar Album

Untitled Document

» Strats On Ebay

All times are GMT -5. The time now is 08:20 PM.

The words Fender®, Telecaster®, Stratocaster® and the associated headstock designs are registered trademarks of the Fender Musical Instruments Corporation.
Strat-Talk.com is an independent, member supported forum and is not affiliated with Fender Musical Instruments Corporation.
© 2007 All rights reserved.

Strat-Talk.com is not responsible for the content posted by private individuals on this website. The views expressed herein are solely the opinions of the individuals that produced them and not necessarily the views of the owner of this website.