Warmoth.com Amplified Parts darrenriley.com Guitar Pickups

Warmoth.com Amplified Parts darrenriley.com Guitar Pickups

Warmoth.com Amplified Parts darrenriley.com Guitar Pickups

Join Strat-Talk Today

Schaller Megaswitch Model E Wiring - Switching

Discussion in 'Tech-Talk' started by Phostenix, Aug 1, 2011.

  1. Phostenix

    Phostenix Strat-Talker

    Messages:
    450
    Joined:
    Jul 30, 2010
    Location:
    Anthem, AZ
    Here's some info on how the Schaller Megaswitch Model E 5-way switch works:


    Schaller Megaswitch Model E

    Terminals:

    1. Connected to Terminal 3 in positions 2 & 4
    2. Connected to Terminal 3 in positions 3, 4, & 5
    3. Normally connected to the Output
    4. Normally connected to Ground
    5. Connected to Terminal 4 in positions 3 & 4
    6. Connected to Terminal 3 in positions 3 and to Terminal 4 in position 2
    7. Connected to Terminal 3 in positions 1 & 2


    Switching Arrangement (Terminal Connections):


    1 is normally the Middle pup Hot lead
    2 is normally the Neck pup Hot lead
    3 is Normally Output
    4 is normally Ground, except with 3 single coils (not connected)
    6 is normally the coil splits of a Bridge humbucker
    5 is normally the coil splits of a Neck humbucker
    7 is normally the Bridge pup Hot lead


    Switching Positions:

    1. 7 to 3
    2. 7 to 3, 1 to 3, 6 to 4
    3. 6 to 3, 2 to 3, 5 to 4
    4. 2 to 3, 1 to 3, 5 to 4
    5. 2 to 3

    http://www.eyb-guitars.de/Eyb-English/Megaswitch_files/English Megaswitch E.pdf
     

Share This Page