Separate names with a comma.
. Maple, it looks sharp on that guitar. An all maple neck plus fretboard is more stable through temperature and humidity fluctuations. And...
. Even 'dimed' at ten the tone cap colors the output unless you have a no load pot. Most Gibson and Epiphone LP/SGs have 0.047uf except for...
. +1 make the back of the neck gloss with 800+ grit paper. When you go to sell the guitar later you can polish it back to gloss. If you remove...
All you need is one of these $5 irons. See the Harbor Freight link below or via Amazon. Soldering a guitar is all technique. Doesn't matter how...
. The ESP LTDs are made in the same Korean factory as the PRS SE models. PRS moved to Indonesia for lower costs, not sure about the LTDs, but hey...
. 12th fret dots are wrong, neck is not a Squier. Assume it's all random parts. Is the price ok for a random group of parts? It could be set up...
. I'd go with an Armstrong Blender (typically used on a Strat, SSS blends to HSH), swap the neck and middle pickup hot leads at the switch (to...
. The previous MIM 'Standards' had dual ceramic bar magnets which increase the output voltage over the traditional Alnico 5 pole magnets used in...
. The only thing separating your $75 Glarry from a $3,000 Gibson, from a playability aspect, is the PLEK machine... Gibsons get PLEK'd at the...
. MIM to MIA parts fit fine. .
. Great to see the back side of that pickguard. Still a more complex switch expense than I expected the brand to use. Also interesting to see...
. Most likely an MIJ 80s/90s model, recut and labeled headstock. Is the body thinner than normal? I once had a 'Maxon' branded guitar that...
. PRS SE Fender MIM G&L Tribute Reverend Harley Benton Glarry Grote .
. All the 'full thickness' inquiries revolve around putting 'big block' trems in guitars. Don't believe all the rumors and snake oil about big...
. How about this for $170 new? [IMG] https://www.thomannmusic.com/harley_benton_te_70_black_paisley.htm TE-70RW [IMG] .
