Separate names with a comma.
There was something about a high mass copper infused trem block - not sure if it was 2012 revision though.
There are 4 basic cap values, 0.022uF, 0.033uF, 0.047uF and 0.1uF.. It costs very little to get some of each and experiment.
All looks good.
Wire colors are the updated (2008?) American Standard. Pickup codes in white sharpie are correct
Delta Tone is a mix of hot bridge...
My guess - 2012 FSR, color White Chrome Pearl.
Service diagram showing standard wiring...
I thought the same.
Possibly Highway 1 upgrade alnico 3 pickups. DCRs are about right. Fender now call them Deluxe Drive.
This is a 2008 Highway 1 loaded pickguard....
Olympic White and Surf Green yes but White Pearl.
Anyone have more info, was there an FSR?
Put your serial number in the Fender registration page see if it somes up with a model.
Fender Product Registration Serial Search
My guess is...
My guess - it's a Highway 1.
The number in the neck pocket 18009 could be inverted. Turned round it becomes 60081 which is the Highway 1 body part...
Fender spec for the SSS from the service diagram. Most recent service diagrams have this information....
Stainless steel block saddles from England.
From the Gibson spec for the LP Tribute 60s 2016 with P90s
^^Yep, the handwritten numbers are the same as found on the Classic Series.
PICKUP ASSY VINTAGE STRAT MEX 0054172000
PICKUP ASSY VINTAGE STRAT MEX...
Spare short post locking tuners 0073114000 are stocked by Darren Riley....
I think they may do.
My guess is SD SSL-1. The labels are the type used by SD and the IR would be an SSL-1 wound by Connie Rocha.
"If there is an...
Seymour Duncan label information here
The CB91710 Gibson style wiring drawing has the outer braid of the pickup wire soldered to the pot casing. This is going to cause more confusion!...
No evidence it is a Mexican body.
We seem to be forgetting about the left-handed tremolo rout on a right-hand body and as I already mentioned the...
Some hex wrenches have a ball end and are prone to breakage.
Something like this.
Fender drawing of the Mex truss rod nut. The hex socket is quite shallow. The wrench should be 3/16" (4.7mm), a Squier 4mm wrench is too small and...
Neck pocket stamp 38918 is the Fender SRV body part number.
The lug positions are placed differently to the Axesrus diagram but are taken from the Electroswitch 52052 marketing material. Electroswitch...
Never used a 6 way what does it give you in terms of pickup combinations.