Separate names with a comma.
Seems like you made the right decision!
Welcome! Here are a few questions that will help us provide some guidance: 1) What pickups were in the strat before? If you're unsure, what...
I'm going to modify my earlier response a bit...If your current tuner holes are well centered, I would just widen those using a reamer, and then...
Normally I'd suggest a reamer, but a reamer will keep the center point of the hole and just widen it proportionally. Since you need to move the...
Exactly...I’d maybe lower that age a little bit, but as your fans get older and you become less relevant, your music’s value decreases (from a...
Was the Valentine's Day candy right besides it? Not sure I've ever seen them both sold at the same time before. Maybe covid supply issue concerns...
Way too early. BUT all of those candies are delicious, so I suppose I can live with it. Peeps on the other hand...
One other thing I'll add about why I like Stratosphere...I prefer fat necks and at least a 1 11/16th nut width. Outside of the custom shop, good...
Keep in mind that what you buy from Stratosphere has no warranty (at least I'm pretty sure). I don't think you can show a Stratosphere receipt to...
Congrats! Waterloo's are outstanding.
Ron Kirn is on this forum and as a regular contributor and his guitars are excellent (although I have no first hand experience...yet).
Is that an Eden body? Looks great! I normally don't like black pickguards, but it looks awesome on that body.
With the drip edge, that should be a 68 or early 69. It should also still be the same circuit as the blackface super reverbs.
I like treble bleeds. I'm not rushing to add them to all of my guitars, but if I'm building one or need to remove a pick guard for some reason,...
I have the Ditto and the Trio+. They are both excellent and have their different uses.
It’s probably an early 1994. It was common for serial numbers to roll into the next year.
Wow...I need to take some time and dig through that old bin in the corner of my basement. There are so many cards in there, a lot of them still in...
Does it feel horrible when playing it? Or can you live with the way the neck feels? If it plays OK, I'd just clean up and dress the fret ends and...
It looks like the fret ends right near it are pretty mangled too. Do you have a good luthier that can take a look in person for you?
Is it filled in properly so that the fretboard edge matches the edge profile of the frets immediately next to it? If it is filled in properly,...
I haven't read through all of the pages of this thread, so perhaps it's already been mentioned...but pretty much any song by, or covered, by the...
There was recently a thread on this: https://www.strat-talk.com/threads/rolling-fretboard-edges.554876/ And here's my reply from that thread:...
Use tru-oil. It is very novice-friendly, and looks great as a satin finish. It can also get very glossy, but that looks best if you grain fill...
Thanks. I didn't think to use nuts as a way to preserve the threads...makes sense.
A hardware store has the pivot screws?? Are pivot screws common for other things besides tremolos? [IMG]
