Search Results

Thanks. That has annoyed me. Bookmarked on recent.

Custom Shop bodies get that stamp. Common.

Could be you nut is cut with 010 anyway. You just have to try and see. Just tune up and lift your string out of the slot under tension. If it...

If you like the height you need to have a fall-away from 14th fret and up. Also it is a nightmare to play with very low strings and if you bend a...

I bought my own nut files and started learning myself. Get good and you can do it for others and make a buck.

Mine too. So i built my own version Two brothers won that strat. Had pretty worn frets.

Dont lacquer the neck pocket. Keep it naked and free. I mean the whole thing. You should paint and lacquer the whole back. including Neck plate...

Pre-CBS?.. Fullerton Strat or reissue? For such an old and valuable guitar, why buy low quality tuners? A grand old lady deserves the best of the...

I tried to tune my guitar like this guy does. Similar to Frudua. And it works.. [MEDIA]

Great sound for the value.

Use waterbased dye. Avoid oils at all cost if you are to put nitro on top. Alcoho dyel is ok too but would leave to dry well anyways Put to dry...

Most of them are click-baiters..

Wallpaper is out of fashion here..

For the pickguard hole i would scrape of even layers with a brand new sharp snap-off knives. And sand away and level off any bumps once it fits....

Have any more close up photos of the gap? Its not a technical issue if it does not bother you.

If you dont like the gloss finish on a fretboard, sand it off.

Yes. But you should use higher than 1200 on the last coat. Hairline scratches from 1200 would even be visible after you have buffed it. Some would...

Despite all the mod i would put on (Except Bigsby's) It will still just be a hunk of wood with some strings on.. Basic and straight to the point.

Anyone on TGP? I think people are so toxic over there at times..

Has Rene Martinez ever come out with any secrets about his rig?

My Gilmour strat have the Fat 50 and Fat 60 in mid and bridge (Don´t know which is where) I simply love the tone of that guitar. Stratty enough to me.

Can mix and match plenty. Please have in mind about polarity and winding directions how they work. Pickup Polarity: Whats The Deal? An Easy Guide...

If he wants a Pao Ferro then sure. Easy as pie. More tougher on Maple necks

Most likely it will slip straight in. might be tight, might be narrower. Usually have the same universal measure. Mexico necks don´t have rolled...

The fenders Medium Jumbo are fine to me. Just fretted my other strat with Jescar Fret Wire 43080 – Jescar (jescarguitar.com) in SS. Slight...